Victor Bluetooth AC Leakage Current Tester – 0.01mA Resolution, Harmonic Analysis, 300A–2000A Range 140E / 6800E / 7100E

Three Models Cover Every AC Leakage Scenario

• The Victor series offers three dedicated AC leakage current tester models to match your exact needs:
  • 140E – 300A range, Φ40mm jaw (compact for distribution panels)
  • 6800E – 1200A range, Φ70mm jaw (industrial motor circuits)
  • 7100E – 2000A range, 80mm×80mm rectangular jaw (large busbars, transformers)
• All models share 0.01mA resolution – true AC leakage current tester sensitivity from tiny parasitic currents to full-load faults.

Industry-Leading 0.01mA Resolution

• Unlike standard clamp meters that start at 0.1A, this AC leakage current tester resolves down to 0.01mA (10µA equivalent).
• Detect insulation degradation, ground loop currents, and early-stage leakage before they become safety hazards.
• Whether measuring 0.05mA on a medical device or 50A on a feeder, the same AC leakage current tester delivers consistent accuracy.

Ultra-Wide Measurement Range

• 140E: 0.00mA to 300A – ideal for commercial buildings, HVAC, and lighting circuits
• 6800E: 0.00mA to 1200A – for industrial machinery, UPS systems, and plant-wide distribution
• 7100E: 0.00mA to 2000A – for heavy industry, switchgear, and utility secondary mains
• One AC leakage current tester family spans from sensitive leakage to full-load current.

High Accuracy Across All Models

• Accuracy: ±1.5% rdg ± 5dgt for every model – consistent, trustworthy readings.
• No compromise when stepping up to higher ranges – the 2000A 7100E is as precise as the 140E.
• This AC leakage current tester series maintains laboratory-grade confidence in field conditions.

Bluetooth Connectivity for Remote Monitoring

• Built-in Bluetooth on all three models – stream live leakage data to a smartphone, tablet, or PC.
• Ideal for monitoring AC leakage current from a safe distance (energized switchgear, elevated platforms, confined spaces).
• Enables data logging, trend analysis, and report generation without physically accessing the meter.

Harmonic Analysis (Up to 21st Order)

• Measures and analyzes harmonics up to 21 times (above 10mA) – unique for an AC leakage current tester.
• Identify distortion caused by VFDs, LED drivers, UPS systems, and non-linear loads.
• Distortion rate (THD) displayed directly – no separate power quality analyzer needed.

Adjustable Filter for Clean or Wideband Readings

• Filter ON (40Hz–70Hz) – ignores high-frequency noise; ideal for pure 50/60Hz leakage detection.
• Filter OFF (40Hz–1kHz) – captures harmonics and high-frequency components.
• This AC leakage current tester adapts to both clean power systems and noisy industrial environments.

Comprehensive Data Functions

• Data retention (HOLD) – freeze critical leakage values.
• Data storage – save multiple readings for later review.
• MAX / MIN / AVG – track peak leakage, minimum standby current, and average over time.
• Overflow display ("OL") – clear indication when exceeding range.

Bright Display with Work Lights

• Large LCD: 43mm × 38mm with backlight – readable in dark panels or outdoors.
• Built-in flashlight on all models – illuminate the clamping area without a separate work light.
• A thoughtful AC leakage current tester for real-world electricians working in dim mechanical rooms.

Rugged Design for Harsh Environments

• Operating temperature: -10℃ to 50℃ at <80% RH – works through winter cold and summer heat.
• Storage: -20℃ to 60℃ – leave in a service vehicle without worry.
• Insulation strength: AC 3700V/rms (core to housing) – safe for live testing.
• Safety certified to IEC1010-1, IEC1010-2-032, CAT III 600V, Pollution Degree 2 – a serious AC leakage current tester for professional use.

Easy Battery Management

• Powered by standard 9V battery – globally available.
• Display shows 4-level battery indicator – never surprised by a dead meter.
• Working current: 60mA (72mA with flashlight on) – efficient for extended use.
• Auto power-off after 5 minutes – preserves battery when you walk away.

Sampling Rate & Frequency Response

• Sampling rate: 2 times/second – responsive enough for dynamic leakage tracking.
• Frequency response with filter off: 40Hz–1kHz – captures harmonic content up to the 20th order (50Hz fundamental).
• This AC leakage current tester is also a basic power quality tool.

Line Voltage & Application Scope

• Rated for AC 600V and below circuits – safe for low-voltage distribution, industrial control panels, residential mains, and commercial switchgear.
• Perfect for:
  • Ground leakage current monitoring in RCD/GFCI circuits
  • Neutral current unbalance detection
  • Parasitic current in standby equipment
  • Harmonic leakage from non-linear loads
  • Large conductor testing (7100E rectangular jaw for busbars)

Physical Comparison – Choose Your Jaw

Model	Jaw Size	Best For	Weight
140E	Φ40mm	Panels, compact spaces	281g
6800E	Φ70mm	Thick cables, industrial motors	502g
7100E	80×80mm (rectangular)	Busbars, large conductors, transformers	689g

• All three are true AC leakage current tester instruments – just choose the jaw that fits your conductors.